Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321, first_leg_angle: 95.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, first_leg_length: 0.685 INCHES MINIMUM AND 0.705 INCHES MAXIMUM IN, second_leg_style: END RADIUS. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-013-7703, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS9592-066
NSN:5340-00-013-7703 FSC:5340 CAGE:96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
material
STEEL COMP 321
first_leg_angle
95.0 DEGREES NOMINAL
first_leg_style
END RADIUS
first_leg_width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
first_leg_length
0.685 INCHES MINIMUM AND 0.705 INCHES MAXIMUM IN
second_leg_style
END RADIUS
second_leg_width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designator
ANGLE
second_leg_length
1.935 INCHES MINIMUM AND 1.965 INCHES MAXIMUM IN
first_leg_thickness
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
first_leg_end_radius
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
second_leg_thickness
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
NSN
5340-00-013-7703
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
FIRST LEG STYLE: END RADIUS
•
SECOND LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
FIRST LEG THICKNESS: 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
SECOND LEG HOLE DIAMETER: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
FIRST LEG STYLE
END RADIUS
SECOND LEG HOLE ARRANGEMENT STYLE
ONE HOLE
FIRST LEG HOLE ARRANGEMENT STYLE
ONE HOLE
STYLE DESIGNATOR
ANGLE
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9592-066?
MS9592-066 is a BRACKET,ANGLE.
What parts can replace MS9592-066?
There are 8 known substitutes for MS9592-066: MS9592-009, SAE-AS9592, MS9592-138 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9592-066?
MS9592-066 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-013-7703. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.