PartsTable
Technical Data Sheet
Download PDF

MS9592-021 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS9592-021: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, overall_height: 0.438 INCHES NOMINAL IN, overall_length: 1.438 INCHES NOMINAL IN, first_leg_style: END RADIUS, first_leg_width: 0.125 INCHES NOMINAL IN, second_leg_style: END RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-612-7994, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9592-021
NSN: 5340-01-612-7994
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_height0.438 INCHES NOMINAL IN
overall_length1.438 INCHES NOMINAL IN
first_leg_styleEND RADIUS
first_leg_width0.125 INCHES NOMINAL IN
second_leg_styleEND RADIUS
style_designatorANGLE
material_thickness0.068 INCHES NOMINAL IN
mounting_hole_diameter0.210 INCHES NOMINAL IN
material_document_and_classificationAMS5510 ASSN STD 1ST MATERIAL RESPONSE
second_leg_relationship_to_first_legIDENTICAL
NSN5340-01-612-7994
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9592-021 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: END RADIUS
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5510 ASSN STD 1ST MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.210 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.068 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.438 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
STYLE DESIGNATORANGLE
FIRST LEG STYLEEND RADIUS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5510 ASSN STD 1ST MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.210 INCHES NOMINAL IN
OVERALL LENGTH1.438 INCHES NOMINAL IN
MATERIAL THICKNESS0.068 INCHES NOMINAL IN
FIRST LEG WIDTH0.125 INCHES NOMINAL IN
SECOND LEG STYLEEND RADIUS
SUBSTITUTES & CROSS-REFERENCES 1
SAE-AS9592Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS9592-021?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9592-021?
MS9592-021 is a BRACKET,ANGLE.
What parts can replace MS9592-021?
There is 1 known substitute for MS9592-021: SAE-AS9592. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9592-021?
MS9592-021 is cataloged in the U.S. Government catalog under NSN 5340-01-612-7994. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9592-021