PartsTable
Technical Data Sheet
Download PDF

MS9552-135 — PLATE,MENDING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS9552-135: PLATE,MENDING.

The PLATE,MENDING is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, overall_width: 0.500 INCHES NOMINAL IN, overall_length: 2.972 INCHES MINIMUM AND 3.002 INCHES MAXIMUM IN, special_features: LEFT HOLE DIA IS 0.200 IN (MIN) AND 0.210 IN (MAX);RIGHT HOLE IS 0.260 IN (MIN) AND 0.270 IN (MAX) IN, style_designator: RECTANGULAR, material_thickness: 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-624-5675, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9552-135
NSN: 5340-01-624-5675
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
hole_quantity2
overall_width0.500 INCHES NOMINAL IN
overall_length2.972 INCHES MINIMUM AND 3.002 INCHES MAXIMUM IN
special_featuresLEFT HOLE DIA IS 0.200 IN (MIN) AND 0.210 IN (MAX);RIGHT HOLE IS 0.260 IN (MIN) AND 0.270 IN (MAX) IN
style_designatorRECTANGULAR
material_thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
mounting_hole_typePLAIN
NSN5340-01-624-5675
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9552-135 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL THICKNESS: 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING
•
HOLE QUANTITY: 2
•
MOUNTING HOLE TYPE: PLAIN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORRECTANGULAR
OVERALL LENGTH2.972 INCHES MINIMUM AND 3.002 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
SPECIAL FEATURESLEFT HOLE DIA IS 0.200 IN (MIN) AND 0.210 IN (MAX);RIGHT HOLE IS 0.260 IN (MIN) AND 0.270 IN (MAX) IN
MATERIALSTEEL CORROSION RESISTING
HOLE QUANTITY2
MOUNTING HOLE TYPEPLAIN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
SAE-AS9552-135Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS9552Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS9552-135?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9552-135?
MS9552-135 is a PLATE,MENDING.
What parts can replace MS9552-135?
There are 2 known substitutes for MS9552-135: SAE-AS9552-135, SAE-AS9552. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9552-135?
MS9552-135 is cataloged in the U.S. Government catalog under NSN 5340-01-624-5675. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9552-135