PartsTable
Technical Data Sheet
Download PDF

MS9552-018 — PLATE,MOUNTING,AIRC

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS9552-018: PLATE,MOUNTING,AIRC.

The PLATE,MOUNTING,AIRC is a the manufacturer industrial component. Key specifications include end_item_identification: V-22 AIRCRAFT, part_name_assigned_by_controlling_agency: BRACKET, FLAT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-283-6483, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9552-018
NSN: 5340-01-283-6483
NIINs: 012836483, 014974201, 016977672
FSC: 5340 — Hardware, Commercial
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
end_item_identificationV-22 AIRCRAFT
part_name_assigned_by_controlling_agencyBRACKET, FLAT
NSN5340-01-283-6483
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9552-018 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 321
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORRECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
OVERALL LENGTH1.500 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
SPECIAL FEATURESSIDES ROUNDED
MATERIALSTEEL COMP 321
HOLE QUANTITY2
SUBSTITUTES & CROSS-REFERENCES 1
SAE-AS9552Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy MS9552-018?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9552-018?
MS9552-018 is a PLATE,MOUNTING,AIRC.
What parts can replace MS9552-018?
There is 1 known substitute for MS9552-018: SAE-AS9552. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9552-018?
MS9552-018 is cataloged in the U.S. Government catalog under NSN 5340-01-283-6483. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9552-018