MS9462-16 — PIN,STRAIGHT,HEADED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

MS9462-16: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.047 INCHES NOMINAL IN, diameter: 0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN, material: IRON ALLOY 660 OVERALL, head_style: PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION), chamfer_length: 0.047 INCHES NOMINAL IN, surface_finish: 63.0 MICROINCHES HEAD BEARING SURFACE.

This part is cataloged in the U.S. Government catalog under NSN 5315-01-120-1570, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS9462-16

NSN: 5315-01-120-1570
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

height	0.047 INCHES NOMINAL IN
diameter	0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
material	IRON ALLOY 660 OVERALL
head_style	PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
chamfer_length	0.047 INCHES NOMINAL IN
surface_finish	63.0 MICROINCHES HEAD BEARING SURFACE
style_designator	STRAIGHT
pin_chamfer_angle	15.0 DEGREES NOMINAL
pin_head_diameter	0.250 INCHES NOMINAL IN
under_head_length	1.094 INCHES NOMINAL IN
first_hole_diameter	0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
hole_arrangement_style	ONE END DRILLED
NSN	5315-01-120-1570

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 63.0 MICROINCHES HEAD BEARING SURFACE

•

CHAMFER LENGTH: 0.047 INCHES NOMINAL IN

•

HOLE ARRANGEMENT STYLE: ONE END DRILLED

•

UNDER HEAD LENGTH: 1.094 INCHES NOMINAL IN

•

PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL

•

FIRST HOLE DIAMETER: 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: STRAIGHT

TECHNICAL CHARACTERISTICS

SURFACE FINISH	63.0 MICROINCHES HEAD BEARING SURFACE
SURFACE FINISH	32.0 MICROINCHES LONG SHANK
CHAMFER LENGTH	0.047 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLE	ONE END DRILLED
UNDER HEAD LENGTH	1.094 INCHES NOMINAL IN
PIN CHAMFER ANGLE	15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER	0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
STYLE DESIGNATOR	STRAIGHT
PIN HEAD DIAMETER	0.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

SUBSTITUTES & CROSS-REFERENCES 1

10122917Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS9462-16?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS9462-16?

MS9462-16 is a PIN,STRAIGHT,HEADED.

What parts can replace MS9462-16?

There is 1 known substitute for MS9462-16: 10122917. Substitute compatibility should be verified for your specific system.

What is the NSN for MS9462-16?

MS9462-16 is cataloged in the U.S. Government catalog under NSN 5315-01-120-1570. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS9462-16 — PIN,STRAIGHT,HEADED

Request a Quote — MS9462-16