PartsTable
Technical Data Sheet
Download PDF

MS9394-01 — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS9394-01: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL COMP 321 LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.500 INCHES NOMINAL IN, overall_length: 2.495 INCHES NOMINAL IN, style_designator: STRAIGHT ARCH. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-435-5696, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9394-01
NSN: 5340-01-435-5696
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL COMP 321 LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.500 INCHES NOMINAL IN
overall_length2.495 INCHES NOMINAL IN
style_designatorSTRAIGHT ARCH
material_thickness0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
inside_diameter/arch_length1.155 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.562 INCHES NOMINAL IN
NSN5340-01-435-5696
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9394-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING PAD: NOT INCLUDED
•
STYLE DESIGNATOR: STRAIGHT ARCH
•
MATERIAL THICKNESS: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
CUSHION: NOT INCLUDED
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.562 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 321 LOCATION NOT OTHERWISE SPECIFIED
TECHNICAL CHARACTERISTICS
MOUNTING PADNOT INCLUDED
STYLE DESIGNATORSTRAIGHT ARCH
OVERALL LENGTH2.495 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
CUSHIONNOT INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.562 INCHES NOMINAL IN
MATERIALSTEEL COMP 321 LOCATION NOT OTHERWISE SPECIFIED
INSIDE DIAMETER/ARCH LENGTH1.155 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
SAE-AS9394Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS9394-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9394-01?
MS9394-01 is a STRAP,RETAINING.
What parts can replace MS9394-01?
There is 1 known substitute for MS9394-01: SAE-AS9394. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9394-01?
MS9394-01 is cataloged in the U.S. Government catalog under NSN 5340-01-435-5696. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9394-01