Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM, outside_diameter: 0.495 INCHES NOMINAL IN, special_features: COLOR IS RUST, center_hole_diameter: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-222-1680, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS9385-04
NSN:5331-00-222-1680 FSC:5331 — O-RING CAGE:FAFL7 — ALA FRANCE (FRA)
SPECIFICATIONS
material
RUBBER SILICONE CLASS Q
temp_rating
-85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
hardness_rating
80.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM
outside_diameter
0.495 INCHES NOMINAL IN
special_features
COLOR IS RUST
center_hole_diameter
0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
elongation_percentage
125 MAXIMUM
cross-sectional_height
0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
NSN
5331-00-222-1680
COMPONENT DIAGRAM
KEY FEATURES
•
TEMP RATING: -85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
•
HARDNESS RATING: 80.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
OUTSIDE DIAMETER: 0.495 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING
-85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER
0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
MATERIAL
RUBBER SILICONE CLASS Q
HARDNESS RATING
80.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9385-04?
MS9385-04 is a O-RING.
What parts can replace MS9385-04?
There are 24 known substitutes for MS9385-04: MS9385-05, MS9385-06ES, MS9385-06 and 21 more. Substitute compatibility should be verified for your specific system.
Is MS9385-04 still available?
MS9385-04 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.