PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS9379-10
MS9379-10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include radius: 0.938 INCHES NOMINAL IN, material: STEEL, outside_diameter: 0.750 INCHES NOMINAL IN, style_designator: CONCAVE, material_thickness: 0.063 INCHES NOMINAL IN, material_document_and_classification: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-343-3033, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9379-10
NSN: 5340-01-343-3033
FSC: 5340
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
radius0.938 INCHES NOMINAL IN
materialSTEEL
outside_diameter0.750 INCHES NOMINAL IN
style_designatorCONCAVE
material_thickness0.063 INCHES NOMINAL IN
material_document_and_classificationAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-01-343-3033
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9379-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
•
STYLE DESIGNATOR: CONCAVE
•
RADIUS: 0.938 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.750 INCHES NOMINAL IN
MATERIALSTEEL
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
STYLE DESIGNATORCONCAVE
RADIUS0.938 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
BEDX1ADInterchangeable
interchangeable cross-reference
interchangeable
22-57-1Interchangeable
interchangeable cross-reference
interchangeable
5214781Interchangeable
interchangeable cross-reference
interchangeable
172547Interchangeable
interchangeable cross-reference
interchangeable
12G101Interchangeable
interchangeable cross-reference
interchangeable
117920Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS9379-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9379-10?
MS9379-10 is a PLUG,EXPANSION.
What parts can replace MS9379-10?
There are 19 known substitutes for MS9379-10: BEDX1AD, 22-57-1, 5214781 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9379-10?
MS9379-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-343-3033. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9379-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026