PartsTable
Technical Data Sheet
Download PDF

MS9372-041 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS9372-041: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, outside_diameter: 1.375 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 1.247 INCHES NOMINAL IN, surface_treatment: PASSIVATE OVERALL, cross-sectional_thickness: 0.062 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-733-3642, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9372-041
NSN: 5330-00-733-3642
FSC: 5330 — Packing and Gasket Materials
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
outside_diameter1.375 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter1.247 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleHOLLOW
specification/standard_data81343-MS9372-041 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-733-3642
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9372-041 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: HOLLOW
•
OUTSIDE DIAMETER: 1.375 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.247 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 81343-MS9372-041 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEHOLLOW
OUTSIDE DIAMETER1.375 INCHES NOMINAL IN
APERTURE DIAMETER1.247 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA81343-MS9372-041 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 304 OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
SAE-AS9372Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
H1375AAGReference document
Same NSN cross-reference
Reference document — Secondary reference
362-531-9012Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS9372-041?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9372-041?
MS9372-041 is a GASKET.
What parts can replace MS9372-041?
There are 3 known substitutes for MS9372-041: SAE-AS9372, H1375AAG, 362-531-9012. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9372-041?
MS9372-041 is cataloged in the U.S. Government catalog under NSN 5330-00-733-3642. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9372-041