PartsTable
Technical Data Sheet
Download PDF

MS9372-039 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS9372-039: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, outside_diameter: 1.250 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 1.185 INCHES MINIMUM AND 1.194 INCHES MAXIMUM IN, cross-sectional_shape_style: METAL, specification/standard_data: 96906-MS9372-039 GOVERNMENT STANDARD. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-387-3347, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9372-039
NSN: 5330-01-387-3347
FSC: 5330 — Packing and Gasket Materials
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
outside_diameter1.250 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter1.185 INCHES MINIMUM AND 1.194 INCHES MAXIMUM IN
cross-sectional_shape_styleMETAL
specification/standard_data96906-MS9372-039 GOVERNMENT STANDARD
cross_section_outside_diameter0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
NSN5330-01-387-3347
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9372-039 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: METAL
•
OUTSIDE DIAMETER: 1.250 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 1.185 INCHES MINIMUM AND 1.194 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 96906-MS9372-039 GOVERNMENT STANDARD
•
CROSS SECTION OUTSIDE DIAMETER: 0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLEMETAL
OUTSIDE DIAMETER1.250 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN
APERTURE DIAMETER1.185 INCHES MINIMUM AND 1.194 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA96906-MS9372-039 GOVERNMENT STANDARD
CROSS SECTION OUTSIDE DIAMETER0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
SAE-AS9372Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS9372-039?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9372-039?
MS9372-039 is a GASKET.
What parts can replace MS9372-039?
There is 1 known substitute for MS9372-039: SAE-AS9372. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9372-039?
MS9372-039 is cataloged in the U.S. Government catalog under NSN 5330-01-387-3347. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9372-039