PartsTable
Technical Data Sheet
Download PDF

MS9372-015 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS9372-015: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, outside_diameter: 0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 0.439 INCHES NOMINAL IN, cross-sectional_shape_style: METAL, specification/standard_data: 96906-MS9372-015 GOVERNMENT STANDARD. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-448-9388, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9372-015
NSN: 5330-01-448-9388
NIINs: 014489388, 014640662
FSC: 5330 — Packing and Gasket Materials
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL OVERALL
outside_diameter0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter0.439 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL
specification/standard_data96906-MS9372-015 GOVERNMENT STANDARD
cross_section_outside_diameter0.056 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
NSN5330-01-448-9388
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9372-015 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: METAL
•
OUTSIDE DIAMETER: 0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 0.439 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 96906-MS9372-015 GOVERNMENT STANDARD
•
CROSS SECTION OUTSIDE DIAMETER: 0.056 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLEMETAL
OUTSIDE DIAMETER0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
APERTURE DIAMETER0.439 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA96906-MS9372-015 GOVERNMENT STANDARD
CROSS SECTION OUTSIDE DIAMETER0.056 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
SAE-AS9372Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS9372-015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9372-015?
MS9372-015 is a GASKET.
What parts can replace MS9372-015?
There is 1 known substitute for MS9372-015: SAE-AS9372. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9372-015?
MS9372-015 is cataloged in the U.S. Government catalog under NSN 5330-01-448-9388. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9372-015

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.