MS9354-5 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS9354-5: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-007-0933, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS9354-5

NSN: 5340-01-007-0933
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

diameter	0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
material	ALUMINUM ALLOY 2024 BAND
overall_width	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
loop_inside_diameter	0.375 INCHES NOMINAL IN
material_document_and_classification	AMS 4041 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.732 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	0.519 INCHES MINIMUM AND 0.539 INCHES MAXIMUM IN
NSN	5340-01-007-0933

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4041 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.732 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.519 INCHES MINIMUM AND 0.539 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 4041 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
OVERALL WIDTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.732 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.519 INCHES MINIMUM AND 0.539 INCHES MAXIMUM IN
MATERIAL	ALUMINUM ALLOY 2024 BAND
LOOP INSIDE DIAMETER	0.375 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 2

MS9354-05Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS9354Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS9354-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS9354-5?

MS9354-5 is a CLAMP,LOOP.

What parts can replace MS9354-5?

There are 2 known substitutes for MS9354-5: MS9354-05, SAE-AS9354. Substitute compatibility should be verified for your specific system.

What is the NSN for MS9354-5?

MS9354-5 is cataloged in the U.S. Government catalog under NSN 5340-01-007-0933. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS9354-5 — CLAMP,LOOP

Request a Quote — MS9354-5