MS9353-13 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS9353-13: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.051 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-412-0147, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS9353-13

NSN: 5340-00-412-0147
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

diameter	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	ALUMINUM ALLOY 2024 BAND
overall_width	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.051 INCHES NOMINAL IN
loop_inside_diameter	0.875 INCHES NOMINAL IN
material_document_and_classification	AMS 4041 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.058 INCHES MINIMUM AND 1.068 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	0.845 INCHES NOMINAL IN
NSN	5340-00-412-0147

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4041 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.058 INCHES MINIMUM AND 1.068 INCHES MAXIMUM IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.845 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 4041 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.051 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.058 INCHES MINIMUM AND 1.068 INCHES MAXIMUM IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.845 INCHES NOMINAL IN
MATERIAL	ALUMINUM ALLOY 2024 BAND
LOOP INSIDE DIAMETER	0.875 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 2

MS9353-17Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

SAE-AS9353Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy MS9353-13?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS9353-13?

MS9353-13 is a CLAMP,LOOP.

What parts can replace MS9353-13?

There are 2 known substitutes for MS9353-13: MS9353-17, SAE-AS9353. Substitute compatibility should be verified for your specific system.

What is the NSN for MS9353-13?

MS9353-13 is cataloged in the U.S. Government catalog under NSN 5340-00-412-0147. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS9353-13 — CLAMP,LOOP

Request a Quote — MS9353-13