PartsTable
Technical Data Sheet
Download PDF

MS9318-102 — RIVET,SOLID

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

MS9318-102: RIVET,SOLID.

The RIVET,SOLID is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400 OVERALL, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), shank_style: STRAIGHT, heat_treatment: ANNEALED OVERALL, shank_diameter: 0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN, fastener_length: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-965-7126, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9318-102
NSN: 5320-00-965-7126
FSC: 5320 — Rivets
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialNICKEL ALLOY 400 OVERALL
head_styleFLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
shank_styleSTRAIGHT
heat_treatmentANNEALED OVERALL
shank_diameter0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
fastener_length0.375 INCHES NOMINAL IN
countersink_angle100.0 DEGREES NOMINAL
head_major_diameter0.210 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
material_document_and_classificationAMS 7233 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5320-00-965-7126
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RIVET,SOLID TITLE COMPONENT PN MS9318-102 MFR RIVET,SOLID
KEY FEATURES
•
SHANK DIAMETER: 0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
HEAT TREATMENT: ANNEALED OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 7233 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
•
SHANK STYLE: STRAIGHT
•
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
•
MATERIAL: NICKEL ALLOY 400 OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
FASTENER LENGTH0.375 INCHES NOMINAL IN
HEAT TREATMENTANNEALED OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 7233 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLEFLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
SHANK STYLESTRAIGHT
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
MATERIALNICKEL ALLOY 400 OVERALL
HEAD MAJOR DIAMETER0.210 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
AS9318Reference document
Same NSN cross-reference
Reference document — Secondary reference
5320PL0738937Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS9318-102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9318-102?
MS9318-102 is a RIVET,SOLID.
What parts can replace MS9318-102?
There are 2 known substitutes for MS9318-102: AS9318, 5320PL0738937. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9318-102?
MS9318-102 is cataloged in the U.S. Government catalog under NSN 5320-00-965-7126. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9318-102