MS9241-012 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS9241-012: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -35.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.493 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, center_hole_diameter: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN, elongation_percentage: 335 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-068-4382, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS9241-012

NSN: 5331-00-068-4382
FSC: 5331 — O-ring
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating	-35.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.493 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
center_hole_diameter	0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
elongation_percentage	335 MAXIMUM
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-00-068-4382

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -35.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.493 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 335 MAXIMUM

•

CENTER HOLE DIAMETER: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN

•

MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

TECHNICAL CHARACTERISTICS

TEMP RATING	-35.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.493 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	335 MAXIMUM
CENTER HOLE DIAMETER	0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
MATERIAL	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

SUBSTITUTES & CROSS-REFERENCES 9

AS3551-012Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MS29561-012Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MS29561-12Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

AS568-012 2BG720B14B34EF11EF21Reference document

Same NSN cross-reference

Reference document — Secondary reference

2-012 N287-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

1557052-15Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedNo demilitarization required

Ready to buy MS9241-012?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS9241-012?

MS9241-012 is a O-RING.

What parts can replace MS9241-012?

There are 9 known substitutes for MS9241-012: AS3551-012, MS29561-012, MS29561-12 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS9241-012?

MS9241-012 is cataloged in the U.S. Government catalog under NSN 5331-00-068-4382. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS9241-012 — O-RING

Request a Quote — MS9241-012