PartsTable
Technical Data Sheet
Download PDF

MS9204-151 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS9204-151: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, outside_diameter: 9.250 INCHES MINIMUM AND 9.255 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 9.048 INCHES MINIMUM AND 9.077 INCHES MAXIMUM IN, cross-sectional_thickness: 0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN, cross-sectional_shape_style: HOLLOW. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-110-6317, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9204-151
NSN: 5330-00-110-6317
FSC: 5330 — Packing and Gasket Materials
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL OVERALL
outside_diameter9.250 INCHES MINIMUM AND 9.255 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter9.048 INCHES MINIMUM AND 9.077 INCHES MAXIMUM IN
cross-sectional_thickness0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
cross-sectional_shape_styleHOLLOW
NSN5330-00-110-6317
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9204-151 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: HOLLOW
•
OUTSIDE DIAMETER: 9.250 INCHES MINIMUM AND 9.255 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 9.048 INCHES MINIMUM AND 9.077 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLEHOLLOW
OUTSIDE DIAMETER9.250 INCHES MINIMUM AND 9.255 INCHES MAXIMUM IN
APERTURE DIAMETER9.048 INCHES MINIMUM AND 9.077 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
5330PL0784531Reference document
Same NSN cross-reference
Reference document — Informative reference only
SAE-AS9204Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS9204-151?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9204-151?
MS9204-151 is a GASKET.
What parts can replace MS9204-151?
There are 2 known substitutes for MS9204-151: 5330PL0784531, SAE-AS9204. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9204-151?
MS9204-151 is cataloged in the U.S. Government catalog under NSN 5330-00-110-6317. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9204-151

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.