PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS9204-115
MS9204-115 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, outside_diameter: 7.000 INCHES MINIMUM AND 7.005 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 6.798 INCHES MINIMUM AND 6.810 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL, cross-sectional_thickness: 0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-531-2445, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9204-115
NSN: 5330-00-531-2445
FSC: 5330
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
outside_diameter7.000 INCHES MINIMUM AND 7.005 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter6.798 INCHES MINIMUM AND 6.810 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
cross-sectional_thickness0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
cross-sectional_shape_styleHOLLOW
NSN5330-00-531-2445
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9204-115 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
OUTSIDE DIAMETER: 7.000 INCHES MINIMUM AND 7.005 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 6.798 INCHES MINIMUM AND 6.810 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: HOLLOW
•
STYLE DESIGNATOR: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
OUTSIDE DIAMETER7.000 INCHES MINIMUM AND 7.005 INCHES MAXIMUM IN
APERTURE DIAMETER6.798 INCHES MINIMUM AND 6.810 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
CROSS-SECTIONAL SHAPE STYLEHOLLOW
STYLE DESIGNATORCIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
700053Interchangeable
interchangeable cross-reference
interchangeable
50-051-0000Interchangeable
interchangeable cross-reference
interchangeable
314-0262-001Interchangeable
interchangeable cross-reference
interchangeable
310071Interchangeable
interchangeable cross-reference
interchangeable
RHNY-029-9Interchangeable
interchangeable cross-reference
interchangeable
RHNY-029NAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS9204-115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9204-115?
MS9204-115 is a GASKET.
What parts can replace MS9204-115?
There are 14 known substitutes for MS9204-115: 700053, 50-051-0000, 314-0262-001 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9204-115?
MS9204-115 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-531-2445. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9204-115

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026