PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS9202-119
MS9202-119 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, outside_diameter: 6.250 INCHES MINIMUM AND 6.255 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 6.116 INCHES MINIMUM AND 6.143 INCHES MAXIMUM IN, cross-sectional_thickness: 0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN, cross-sectional_shape_style: HOLLOW. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-110-2931, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9202-119
NSN: 5330-00-110-2931
FSC: 5330
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
outside_diameter6.250 INCHES MINIMUM AND 6.255 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter6.116 INCHES MINIMUM AND 6.143 INCHES MAXIMUM IN
cross-sectional_thickness0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
cross-sectional_shape_styleHOLLOW
NSN5330-00-110-2931
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9202-119 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 6.116 INCHES MINIMUM AND 6.143 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: HOLLOW
•
OUTSIDE DIAMETER: 6.250 INCHES MINIMUM AND 6.255 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
APERTURE DIAMETER6.116 INCHES MINIMUM AND 6.143 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLEHOLLOW
OUTSIDE DIAMETER6.250 INCHES MINIMUM AND 6.255 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
A2375CInterchangeable
interchangeable cross-reference
interchangeable
186948Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS9202Interchangeable
interchangeable cross-reference
interchangeable
MS9202-029Interchangeable
interchangeable cross-reference
interchangeable
MS9202-053Interchangeable
interchangeable cross-reference
interchangeable
A2125CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS9202-119?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9202-119?
MS9202-119 is a GASKET.
What parts can replace MS9202-119?
There are 16 known substitutes for MS9202-119: A2375C, 186948, SAE-AS9202 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9202-119?
MS9202-119 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-110-2931. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9202-119

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026