PartsTable
Technical Data Sheet
Download PDF

MS9200-16 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS9200-16: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, nut_style: HEXAGON, nut_height: 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-854-7974, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9200-16
NSN: 5310-00-854-7974
FSC: 5310 — Nuts and Washers
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
nut_styleHEXAGON
nut_height0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
thread_class3B
thread_seriesUN
thread_directionRIGHT-HAND
countersink_angle105.0 DEGREES MINIMUM AND 115.0 DEGREES MAXIMUM NUT
surface_treatmentANODIZE OVERALL
width_across_flats1.614 INCHES MINIMUM AND 1.627 INCHES MAXIMUM IN
nominal_thread_size1.312 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
drilled_hole_diameter0.070 INCHES NOMINAL IN
NSN5310-00-854-7974
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS9200-16 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.614 INCHES MINIMUM AND 1.627 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 63.0 MICROINCHES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2470 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UN
•
HOLE CONFIGURATION STYLE: CONFIGURATION B
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4120 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.312 INCHES IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.614 INCHES MINIMUM AND 1.627 INCHES MAXIMUM IN
BEARING SURFACE FINISH63.0 MICROINCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2470 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUN
HOLE CONFIGURATION STYLECONFIGURATION B
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4120 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.312 INCHES IN
NUT HEIGHT0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
DRILLED HOLE DIAMETER0.070 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
2629755Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS9200-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9200-16?
MS9200-16 is a NUT,PLAIN,HEXAGON.
What parts can replace MS9200-16?
There is 1 known substitute for MS9200-16: 2629755. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9200-16?
MS9200-16 is cataloged in the U.S. Government catalog under NSN 5310-00-854-7974. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9200-16

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.