PartsTable
Technical Data Sheet
Download PDF

MS91528-1E28 — MS91528-1E28

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

MS91528-1E28: MS91528-1E28.

The MS91528-1E28 is a the manufacturer industrial component. Key specifications include skirt_style: STEPPED, skirt_design: NONDETACHABLE, overall_depth: 0.568 INCHES MINIMUM IN, inside_diameter: 0.252 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN, outside_diameter: 0.690 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN, screw_drive_type: HEXAGON SOCKET. This part is cataloged in the U.S.

Government catalog under NSN 5355-00-994-3435, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS91528-1E28
NSN: 5355-00-994-3435
FSC: 5355 — Knobs and Pointers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
skirt_styleSTEPPED
skirt_designNONDETACHABLE
overall_depth0.568 INCHES MINIMUM IN
inside_diameter0.252 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN
outside_diameter0.690 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN
screw_drive_typeHEXAGON SOCKET
style_designatorROUND
attachment_methodSETSCREWS
counterbore_depth0.188 INCHES MINIMUM IN
overall_thickness0.752 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
reference_markingDOT
nominal_thread_size0.112 INCHES SCREW HOLE IN
NSN5355-00-994-3435
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available MS91528-1E28 TITLE COMPONENT PN MS91528-1E28 MFR MS91528-1E28
KEY FEATURES
•
DISTANCE FROM HOLE CENTER TO KNOB/SKIRT BASE: 0.369 INCHES MAXIMUM IN
•
SHAFT ACCOMMODATION STYLE: COUNTERBORED
•
OVERALL THICKNESS: 0.752 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
•
SKIRT OUTSIDE DIAMETER: 0.680 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ROUND
•
OUTSIDE DIAMETER: 0.690 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN
•
COUNTERBORE DEPTH: 0.188 INCHES MINIMUM IN
•
REFERENCE MARKING: DOT
TECHNICAL CHARACTERISTICS
DISTANCE FROM HOLE CENTER TO KNOB/SKIRT BASE0.369 INCHES MAXIMUM IN
SHAFT ACCOMMODATION STYLECOUNTERBORED
OVERALL THICKNESS0.752 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
SKIRT OUTSIDE DIAMETER0.680 INCHES MAXIMUM IN
STYLE DESIGNATORROUND
OUTSIDE DIAMETER0.690 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN
COUNTERBORE DEPTH0.188 INCHES MINIMUM IN
REFERENCE MARKINGDOT
SETSCREW HOLE QUANTITY2
NOMINAL THREAD SIZE0.112 INCHES SCREW HOLE IN
SUBSTITUTES & CROSS-REFERENCES 7
70-2WD2GSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PS-70D-2-BLACKReference document
Same NSN cross-reference
Reference document — Secondary reference
507-2WD2GReference document
Same NSN cross-reference
Reference document — Secondary reference
060853-0002Reference document
Same NSN cross-reference
Reference document — Secondary reference
7L2RSWDReference document
Same NSN cross-reference
Reference document — Secondary reference
042-034Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS91528-1E28?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS91528-1E28?
MS91528-1E28 is a MS91528-1E28.
What parts can replace MS91528-1E28?
There are 7 known substitutes for MS91528-1E28: 70-2WD2G, PS-70D-2-BLACK, 507-2WD2G and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS91528-1E28?
MS91528-1E28 is cataloged in the U.S. Government catalog under NSN 5355-00-994-3435. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS91528-1E28