PartsTable / COMPONENT / MS9141-05
MS9141-05
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, outside_diameter: 0.312 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 0.236 INCHES MINIMUM AND 0.259 INCHES MAXIMUM IN, cross-sectional_thickness: 0.034 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN, cross-sectional_shape_style: HOLLOW. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-143-7744, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS9141-05
NSN: 5330-00-143-7744 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material STEEL CORROSION RESISTING OVERALL outside_diameter 0.312 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN style_designator CIRCULAR aperture_diameter 0.236 INCHES MINIMUM AND 0.259 INCHES MAXIMUM IN cross-sectional_thickness 0.034 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN cross-sectional_shape_style HOLLOW NSN 5330-00-143-7744
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: MS9141-05
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• STYLE DESIGNATOR: CIRCULAR
• APERTURE DIAMETER: 0.236 INCHES MINIMUM AND 0.259 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 0.312 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
• CROSS-SECTIONAL THICKNESS: 0.034 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
• CROSS-SECTIONAL SHAPE STYLE: HOLLOW
• MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOR CIRCULAR APERTURE DIAMETER 0.236 INCHES MINIMUM AND 0.259 INCHES MAXIMUM IN OUTSIDE DIAMETER 0.312 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN CROSS-SECTIONAL THICKNESS 0.034 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN CROSS-SECTIONAL SHAPE STYLE HOLLOW MATERIAL STEEL CORROSION RESISTING OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
4458 Interchangeable interchangeable cross-reference
interchangeable
1195 Interchangeable interchangeable cross-reference
interchangeable
31214 Interchangeable interchangeable cross-reference
interchangeable
SAE-AS9141 Interchangeable interchangeable cross-reference
interchangeable
MS9141-06 Interchangeable interchangeable cross-reference
interchangeable
62016-22 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy MS9141-05?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9141-05?
MS9141-05 is a GASKET.
What parts can replace MS9141-05?
There are 19 known substitutes for MS9141-05: 4458, 1195, 31214 and 16 more. Substitute compatibility should be verified for your specific system.
Is MS9141-05 still available?
MS9141-05 is currently cancelled.
Request a Quote — MS9141-05