PartsTable
Technical Data Sheet
Download PDF

MS90727-77 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS90727-77: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN, fastener_length: 4.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-269-4530, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS90727-77
NSN: 5305-00-269-4530
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
thread_class2A A
thread_length1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
fastener_length4.750 INCHES NOMINAL IN
hardness_rating32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentZINC AND CHROMATE OVERALL
width_between_flats0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
nominal_thread_diameter0.375 INCHES IN
minimum_tensile_strength150000 POUNDS PER SQUARE INCH LBS
NSN5305-00-269-4530
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS90727-77 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
•
FASTENER LENGTH: 4.750 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
•
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
FASTENER LENGTH4.750 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 6
MS90726-77Reference document
Same NSN cross-reference
Reference document — Secondary reference
5305002694530Reference document
Same NSN cross-reference
Reference document — Informative reference only
B1821BH038F475NReference document
Same NSN cross-reference
Reference document — Secondary reference
62.90.022Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-S-85Reference document
Same NSN cross-reference
Reference document — Secondary reference
ASME B18.2.1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS90727-77?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS90727-77?
MS90727-77 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS90727-77?
There are 6 known substitutes for MS90727-77: MS90726-77, 5305002694530, B1821BH038F475N and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS90727-77?
MS90727-77 is cataloged in the U.S. Government catalog under NSN 5305-00-269-4530. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS90727-77

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.