PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS90727-281
MS90727-281 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.749 INCHES MINIMUM AND 0.813 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 2.750 INCHES MINIMUM AND 2.938 INCHES MAXIMUM IN, fastener_length: 4.812 INCHES MINIMUM AND 5.000 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-066-8173, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS90727-281
NSN: 5305-00-066-8173
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.749 INCHES MINIMUM AND 0.813 INCHES MAXIMUM IN
thread_class2A A
thread_length2.750 INCHES MINIMUM AND 2.938 INCHES MAXIMUM IN
fastener_length4.812 INCHES MINIMUM AND 5.000 INCHES MAXIMUM IN
hardness_rating32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentZINC AND CHROMATE OVERALL
width_between_flats1.812 INCHES MINIMUM AND 1.875 INCHES MAXIMUM IN
nominal_thread_diameter1.250 INCHES IN
minimum_tensile_strength150000 POUNDS PER SQUARE INCH LBS
NSN5305-00-066-8173
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS90727-281 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH LBS
•
FASTENER LENGTH: 4.812 INCHES MINIMUM AND 5.000 INCHES MAXIMUM IN
•
THREAD LENGTH: 2.750 INCHES MINIMUM AND 2.938 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GR8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
•
THREAD QUANTITY PER INCH: 12
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 8 GRADE
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM TENSILE STRENGTH150000 POUNDS PER SQUARE INCH LBS
FASTENER LENGTH4.812 INCHES MINIMUM AND 5.000 INCHES MAXIMUM IN
THREAD LENGTH2.750 INCHES MINIMUM AND 2.938 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J429 GR8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
THREAD QUANTITY PER INCH12
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE AND 8 GRADE
THREAD DIRECTIONRIGHT-HAND
HEAD HEIGHT0.749 INCHES MINIMUM AND 0.813 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
FF-S-85Interchangeable
Same NIIN cross-reference
interchangeable
5305000668173Interchangeable
Same NIIN cross-reference
interchangeable
B18.24Interchangeable
Same NIIN cross-reference
interchangeable
B1821BH125F500NInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS90727-281?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS90727-281?
MS90727-281 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS90727-281?
There are 4 known substitutes for MS90727-281: FF-S-85, 5305000668173, B18.24 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS90727-281?
MS90727-281 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-066-8173. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS90727-281

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026