PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS90725-9
MS90725-9 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.750 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN, fastener_length: 1.125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-071-2242, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS90725-9
NSN: 5305-00-071-2242
FSC: 5305
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
thread_class2A A
thread_length0.750 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
fastener_length1.125 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentZINC AND CHROMATE OVERALL
width_between_flats0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
minimum_yield_strength120000 POUNDS PER SQUARE INCH LBS
end_item_identificationMRAP-RG-33 ARMORED UTILITY VEHICLE (AUV); MRAP - M-ATV UI; MRAP - M-ATV WITH CS13 POP AND SNE; MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
nominal_thread_diameter0.250 INCHES IN
NSN5305-00-071-2242
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS90725-9 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
MINIMUM YIELD STRENGTH: 85 POUNDS PER SQUARE INCH LBS
•
MATERIAL: STEEL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM YIELD STRENGTH85 POUNDS PER SQUARE INCH LBS
MATERIALSTEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HEAD HEIGHT0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
MINIMUM TENSILE STRENGTH120 POUNDS PER SQUARE INCH LBS
FASTENER LENGTH1.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
80028Interchangeable
interchangeable cross-reference
interchangeable
SCD80028Interchangeable
interchangeable cross-reference
interchangeable
66345AXInterchangeable
interchangeable cross-reference
interchangeable
5305PL2184018Interchangeable
interchangeable cross-reference
interchangeable
17S57651-5659Interchangeable
interchangeable cross-reference
interchangeable
90-426-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS90725-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS90725-9?
MS90725-9 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS90725-9?
There are 21 known substitutes for MS90725-9: 80028, SCD80028, 66345AX and 18 more. Substitute compatibility should be verified for your specific system.
Is MS90725-9 still available?
MS90725-9 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS90725-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026