PartsTable
Technical Data Sheet
Download PDF

MS90725-18 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS90725-18: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, fastener_length: 2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-071-2233, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS90725-18
NSN: 5305-00-071-2233
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
thread_class2A A
thread_length0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
fastener_length2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
hardness_rating25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_between_flats0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
nominal_thread_diameter0.250 INCHES IN
minimum_tensile_strength120000 POUNDS PER SQUARE INCH LBS
NSN5305-00-071-2233
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS90725-18 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
•
FASTENER LENGTH: 2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: SAE/AMS QQ-P-416 TY2CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
FASTENER LENGTH2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONSAE/AMS QQ-P-416 TY2CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 9
81301733Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS35289-18Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-S-85Reference document
Same NSN cross-reference
Reference document — Secondary reference
B18.2.1Reference document
Same NSN cross-reference
Reference document — Secondary reference
NASM90725-18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ASME B18.2.1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy MS90725-18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS90725-18?
MS90725-18 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS90725-18?
There are 9 known substitutes for MS90725-18: 81301733, MS35289-18, FF-S-85 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS90725-18?
MS90725-18 is cataloged in the U.S. Government catalog under NSN 5305-00-071-2233. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS90725-18

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.