PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS90725-114
MS90725-114 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.250 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN, fastener_length: 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-071-2070, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS90725-114
NSN: 5305-00-071-2070
FSC: 5305
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
thread_class2A A
thread_length1.250 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN
fastener_length1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
hardness_rating25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_between_flats0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
nominal_thread_diameter0.500 INCHES IN
minimum_tensile_strength120000 POUNDS PER SQUARE INCH LBS
NSN5305-00-071-2070
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS90725-114 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 1.250 INCHES MINIMUM AND 1.442 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH LBS
•
THREAD QUANTITY PER INCH: 13
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
MATERIAL: STEEL OVERALL
•
SURFACE FINISH: 63.0 MICROINCHES THREADS
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAEJ429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR STMA354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH1.250 INCHES MINIMUM AND 1.442 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH150000 POUNDS PER SQUARE INCH LBS
THREAD QUANTITY PER INCH13
NOMINAL THREAD DIAMETER0.500 INCHES IN
END ITEM IDENTIFICATIONMRAP RG-33; MRAP BUFFALO MK2A2; MEDIUM MINE PROTECTED VEHICLE - AMPV; ARMORED MULTI-PURPOSE VEHICLE (AMPV); MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE; HIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS)
MATERIALSTEEL OVERALL
SURFACE FINISH63.0 MICROINCHES THREADS
MATERIAL DOCUMENT AND CLASSIFICATIONSAEJ429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR STMA354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
WIDTH BETWEEN FLATS0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SURFACE TREATMENTCHROMATE ZINC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
8846835Interchangeable
interchangeable cross-reference
interchangeable
P4A10 1-8X3 7-8X1-2Interchangeable
interchangeable cross-reference
interchangeable
A8846835Interchangeable
interchangeable cross-reference
interchangeable
MS90725-114Interchangeable
interchangeable cross-reference
interchangeable
7SS1-27-3Interchangeable
interchangeable cross-reference
interchangeable
61873Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS90725-114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS90725-114?
MS90725-114 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS90725-114?
There are 27 known substitutes for MS90725-114: 8846835, P4A10 1-8X3 7-8X1-2, A8846835 and 24 more. Substitute compatibility should be verified for your specific system.
Is MS90725-114 still available?
MS90725-114 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS90725-114

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026