PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS90713-3 SZ1-1/2IN.L X.099IN.D.
MS90713-3 SZ1-1/2IN.L X.099IN.D. ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The MS90713-3 SZ1-1/2IN.L X.099IN.D. is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-753-3880, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS90713-3 SZ1-1/2IN.L X.099IN.D.
NSN: 5315-00-753-3880
FSC: 5315
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
Part NumberMS90713-3 SZ1-1/2IN.L X.099IN.D.
NSN5315-00-753-3880
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS90713-3 SZ1-1/2IN.L X.099IN.D. · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FABRICATION METHOD: COLD FORMED
•
FASTENER LENGTH: 1.500 INCHES NOMINAL IN
•
UNPACKAGED UNIT WEIGHT: 5.000 POUNDS LBS
•
STERILIZED: NO
•
HEAD DIAMETER: 0.250 INCHES NOMINAL IN
•
POINT STYLE: DIAMOND
•
SHANK STYLE: SMOOTH ROUND
•
SHANK DIAMETER: 0.099 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FABRICATION METHODCOLD FORMED
FASTENER LENGTH1.500 INCHES NOMINAL IN
UNPACKAGED UNIT WEIGHT5.000 POUNDS LBS
STERILIZEDNO
HEAD DIAMETER0.250 INCHES NOMINAL IN
POINT STYLEDIAMOND
SHANK STYLESMOOTH ROUND
SHANK DIAMETER0.099 INCHES NOMINAL IN
HEAD STYLEFLAT
DECORATIVE HEADNO
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
FF-N-105 TY2ST10SZ1-1/2L.X.099D.Interchangeable
interchangeable cross-reference
interchangeable
COM4050Interchangeable
interchangeable cross-reference
interchangeable
MS90713-3Interchangeable
interchangeable cross-reference
interchangeable
COM4530Interchangeable
Same NIIN cross-reference
interchangeable
FF-N-105 TY2ST10SZ1-1/2L X.099D.Interchangeable
Same NIIN cross-reference
interchangeable
ASTM-F1667 NL CM S-03BInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS90713-3 SZ1-1/2IN.L X.099IN.D.?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS90713-3 SZ1-1/2IN.L X.099IN.D.?
MS90713-3 SZ1-1/2IN.L X.099IN.D. is a MS90713-3 SZ1-1/2IN.L X.099IN.D..
What parts can replace MS90713-3 SZ1-1/2IN.L X.099IN.D.?
There are 7 known substitutes for MS90713-3 SZ1-1/2IN.L X.099IN.D.: FF-N-105 TY2ST10SZ1-1/2L.X.099D., COM4050, MS90713-3 and 4 more. Substitute compatibility should be verified for your specific system.
Is MS90713-3 SZ1-1/2IN.L X.099IN.D. still available?
MS90713-3 SZ1-1/2IN.L X.099IN.D. is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS90713-3 SZ1-1/2IN.L X.099IN.D.

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026