PartsTable
Technical Data Sheet
PartsTable / O-RING / MS9068-005
MS9068-005 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: SILICONE OVERALL, temp_rating: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 0.241 INCHES NOMINAL IN, center_hole_diameter: 0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-818-0223, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9068-005
NSN: 5331-00-818-0223
FSC: 5331 — O-RING
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSILICONE OVERALL
temp_rating-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter0.241 INCHES NOMINAL IN
center_hole_diameter0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agencyPACKING,PREFORMED
NSN5331-00-818-0223
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9068-005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
•
CENTER HOLE DIAMETER: 0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 0.230 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE125 MAXIMUM
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
CENTER HOLE DIAMETER0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER0.230 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
10150-2Interchangeable
interchangeable cross-reference
interchangeable
005-11307Interchangeable
interchangeable cross-reference
interchangeable
2-005S604-70Interchangeable
interchangeable cross-reference
interchangeable
131025PC56Interchangeable
interchangeable cross-reference
interchangeable
MS9068-005Interchangeable
interchangeable cross-reference
interchangeable
131028-58Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS9068-005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9068-005?
MS9068-005 is a PACKING,PREFORMED.
What parts can replace MS9068-005?
There are 9 known substitutes for MS9068-005: 10150-2, 005-11307, 2-005S604-70 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9068-005?
MS9068-005 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-818-0223. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9068-005

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026