PartsTable
Technical Data Sheet
Download PDF

MS9062-19 — BOLT,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS9062-19: BOLT,MACHINE.

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, head_style: DOUBLE HEXAGON EXTENDED WASHER, grip_length: 0.502 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN, head_height: 0.375 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 0.876 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-582-0144, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9062-19
NSN: 5306-00-582-0144
FSC: 5306 — Bolts
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialIRON ALLOY 660 OVERALL
head_styleDOUBLE HEXAGON EXTENDED WASHER
grip_length0.502 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
head_height0.375 INCHES NOMINAL IN
thread_class2A A
thread_length0.876 INCHES MINIMUM IN
fastener_length1.438 INCHES NOMINAL IN
special_features4 DRILLED HOLES
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
width_between_flats0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
nominal_thread_diameter0.312 INCHES IN
NSN5306-00-582-0144
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS9062-19 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EXTENDED WASHER THICKNESS: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.375 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.438 INCHES NOMINAL IN
•
EXTENDED WASHER DIAMETER: 0.500 INCHES NOMINAL IN
•
THREAD LENGTH: 0.876 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
FEATURES PROVIDED: FINISHED HEAD
TECHNICAL CHARACTERISTICS
EXTENDED WASHER THICKNESS0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
HEAD HEIGHT0.375 INCHES NOMINAL IN
FASTENER LENGTH1.438 INCHES NOMINAL IN
EXTENDED WASHER DIAMETER0.500 INCHES NOMINAL IN
THREAD LENGTH0.876 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
HEAD STYLEDOUBLE HEXAGON EXTENDED WASHER
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 1
341799Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS9062-19?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9062-19?
MS9062-19 is a BOLT,MACHINE.
What parts can replace MS9062-19?
There is 1 known substitute for MS9062-19: 341799. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9062-19?
MS9062-19 is cataloged in the U.S. Government catalog under NSN 5306-00-582-0144. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9062-19

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.