PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS9048-148
MS9048-148 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,SPRING is a the manufacturer industrial component. Key specifications include diameter: 0.162 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN, material: STEEL COMP 420 OVERALL, overall_length: 2.225 INCHES MINIMUM AND 2.275 INCHES MAXIMUM IN, surface_finish: 80.0 MICROINCHES OUTSIDE DIAMETER, style_designator: SLOTTED, material_thickness: 0.032 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-185-4798, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9048-148
NSN: 5315-01-185-4798
FSC: 5315
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter0.162 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
materialSTEEL COMP 420 OVERALL
overall_length2.225 INCHES MINIMUM AND 2.275 INCHES MAXIMUM IN
surface_finish80.0 MICROINCHES OUTSIDE DIAMETER
style_designatorSLOTTED
material_thickness0.032 INCHES NOMINAL IN
material_document_and_classificationAMS 5506 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5315-01-185-4798
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS9048-148 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SLOTTED
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5506 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 420 OVERALL
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DIAMETER: 0.162 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
•
SURFACE FINISH: 80.0 MICROINCHES OUTSIDE DIAMETER
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSLOTTED
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5506 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 420 OVERALL
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
OVERALL LENGTH2.225 INCHES MINIMUM AND 2.275 INCHES MAXIMUM IN
DIAMETER0.162 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
SURFACE FINISH80.0 MICROINCHES OUTSIDE DIAMETER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
C-110-A-8Interchangeable
interchangeable cross-reference
interchangeable
160-2004-01-03-00Interchangeable
interchangeable cross-reference
interchangeable
17-504-1Interchangeable
interchangeable cross-reference
interchangeable
MS171573Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS9048-148?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9048-148?
MS9048-148 is a PIN,SPRING.
What parts can replace MS9048-148?
There are 4 known substitutes for MS9048-148: C-110-A-8, 160-2004-01-03-00, 17-504-1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9048-148?
MS9048-148 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-185-4798. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9048-148

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026