PartsTable
Technical Data Sheet
Download PDF

MS90376-20YF — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS90376-20YF: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, design_type: FRICTION, overall_diameter: 1.375 INCHES MINIMUM AND 1.437 INCHES MAXIMUM IN, inside_diameter_length: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, round_cap_outside_surface_condition: SMOOTH, material_document_and_classification: MIL-B-81705, TYPE 2 MIL SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-302-6252, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS90376-20YF
NSN: 5340-01-302-6252
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialPLASTIC
design_typeFRICTION
overall_diameter1.375 INCHES MINIMUM AND 1.437 INCHES MAXIMUM IN
inside_diameter_length0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
round_cap_outside_surface_conditionSMOOTH
material_document_and_classificationMIL-B-81705, TYPE 2 MIL SPEC SINGLE MATERIAL RESPONSE
tube_outside_diameter_for_which_designed1.140 INCHES MINIMUM AND 1.160 INCHES MAXIMUM IN
NSN5340-01-302-6252
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS90376-20YF MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 1.375 INCHES MINIMUM AND 1.437 INCHES MAXIMUM IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 1.140 INCHES MINIMUM AND 1.160 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-B-81705, TYPE 2 MIL SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: PLASTIC
•
INSIDE DIAMETER LENGTH: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER1.375 INCHES MINIMUM AND 1.437 INCHES MAXIMUM IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED1.140 INCHES MINIMUM AND 1.160 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-81705, TYPE 2 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALPLASTIC
INSIDE DIAMETER LENGTH0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
SUBSTITUTES & CROSS-REFERENCES 1
MIL-C-5501Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS90376-20YF?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS90376-20YF?
MS90376-20YF is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace MS90376-20YF?
There is 1 known substitute for MS90376-20YF: MIL-C-5501. Substitute compatibility should be verified for your specific system.
What is the NSN for MS90376-20YF?
MS90376-20YF is cataloged in the U.S. Government catalog under NSN 5340-01-302-6252. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS90376-20YF

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.