PartsTable
Technical Data Sheet
MS9021-016 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, material_document_and_classification: AMS7271-80 ASSN STD SINGLE MATERIAL RESPONSE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-584-1231, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9021-016
NSN: 5331-00-584-1231
FSC: 5331 — O-RING
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
material_document_and_classificationAMS7271-80 ASSN STD SINGLE MATERIAL RESPONSE
NSN5331-00-584-1231
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9021-016 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CENTER HOLE DIAMETER: 0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
HARDNESS RATING: 65.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER: 0.754 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
ELONGATION PERCENTAGE: 200 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
HARDNESS RATING65.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER0.754 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
ELONGATION PERCENTAGE200 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
80050-1AInterchangeable
interchangeable cross-reference
interchangeable
MS25010-15AInterchangeable
interchangeable cross-reference
interchangeable
6015495Interchangeable
interchangeable cross-reference
interchangeable
1823-80Interchangeable
interchangeable cross-reference
interchangeable
MS9021D-016Interchangeable
interchangeable cross-reference
interchangeable
MS9021-016Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS9021-016?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9021-016?
MS9021-016 is a O-RING.
What parts can replace MS9021-016?
There are 10 known substitutes for MS9021-016: 80050-1A, MS25010-15A, 6015495 and 7 more. Substitute compatibility should be verified for your specific system.
Is MS9021-016 still available?
MS9021-016 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9021-016