MS9020-11 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS9020-11: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, hardness_rating: 65.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.985 INCHES NOMINAL IN, center_hole_diameter: 0.858 INCHES MINIMUM AND 0.868 INCHES MAXIMUM IN, elongation_percentage: 200 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-627-3683, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS9020-11

NSN: 5331-00-627-3683
FSC: 5331 — O-ring
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating	-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
hardness_rating	65.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.985 INCHES NOMINAL IN
center_hole_diameter	0.858 INCHES MINIMUM AND 0.868 INCHES MAXIMUM IN
elongation_percentage	200 MAXIMUM
cross-sectional_height	0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
NSN	5331-00-627-3683

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.985 INCHES NOMINAL IN

•

HARDNESS RATING: 65.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 200 MAXIMUM

•

CENTER HOLE DIAMETER: 0.858 INCHES MINIMUM AND 0.868 INCHES MAXIMUM IN

•

MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

TECHNICAL CHARACTERISTICS

TEMP RATING	-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.985 INCHES NOMINAL IN
HARDNESS RATING	65.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	200 MAXIMUM
CENTER HOLE DIAMETER	0.858 INCHES MINIMUM AND 0.868 INCHES MAXIMUM IN
MATERIAL	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

SUBSTITUTES & CROSS-REFERENCES 4

PRP568-11-4024-65Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

2661058R011Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

SAE-AS3578Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

AS3578-911Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS9020-11?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS9020-11?

MS9020-11 is a O-RING.

What parts can replace MS9020-11?

There are 4 known substitutes for MS9020-11: PRP568-11-4024-65, 2661058R011, SAE-AS3578 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS9020-11?

MS9020-11 is cataloged in the U.S. Government catalog under NSN 5331-00-627-3683. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS9020-11 — O-RING

Request a Quote — MS9020-11