PartsTable
Technical Data Sheet
PartsTable / O-RING / MS9020-06ES
MS9020-06ES ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 65.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.624 INCHES NOMINAL IN, center_hole_diameter: 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN, elongation_percentage: 200 MAXIMUM, cross-sectional_height: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-582-7475, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9020-06ES
NSN: 5331-00-582-7475
FSC: 5331 — O-RING
CAGE: H2313 — ERIKS B.V. (NLD)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating65.0 SHORE DUROMETER A NOMINAL
outside_diameter0.624 INCHES NOMINAL IN
center_hole_diameter0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
elongation_percentage200 MAXIMUM
cross-sectional_height0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
NSN5331-00-582-7475
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9020-06ES MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 200 MAXIMUM
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 0.624 INCHES NOMINAL IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
ELONGATION PERCENTAGE200 MAXIMUM
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER0.624 INCHES NOMINAL IN
HARDNESS RATING65.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
8526718Interchangeable
interchangeable cross-reference
interchangeable
50049-12Interchangeable
interchangeable cross-reference
interchangeable
306118Interchangeable
interchangeable cross-reference
interchangeable
4192800-90Interchangeable
interchangeable cross-reference
interchangeable
151-041Interchangeable
interchangeable cross-reference
interchangeable
1855467-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS9020-06ES?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9020-06ES?
MS9020-06ES is a O-RING.
What parts can replace MS9020-06ES?
There are 13 known substitutes for MS9020-06ES: 8526718, 50049-12, 306118 and 10 more. Substitute compatibility should be verified for your specific system.
Is MS9020-06ES still available?
MS9020-06ES is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9020-06ES

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026