PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS8000E552C
MS8000E552C ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B SECOND END, vacuum_in_torr: 50.8, connection_type: THREADED INTERNAL TUBE SECOND END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-796-7846, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS8000E552C
NSN: 4720-00-796-7846
FSC: 4720
CAGE: 50599 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV STRATOFLEX PRODUCT DIVISION (USA)
SPECIFICATIONS
flow_angle90.0 DEGREES SECOND END
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B SECOND END
vacuum_in_torr50.8
connection_typeTHREADED INTERNAL TUBE SECOND END
inside_diameter0.188 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE SECOND END
outside_diameter0.312 INCHES NOMINAL IN
thread_directionRIGHT-HAND SECOND END
features_providedELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS
operating_pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
NSN4720-00-796-7846
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MS8000E552C · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONNECTION TYPE: THREADED INTERNAL TUBE SECOND END
•
INSIDE DIAMETER: 0.188 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
NOMINAL THREAD SIZE: 0.438 INCHES SECOND END IN
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
OUTSIDE DIAMETER: 0.312 INCHES NOMINAL IN
•
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
TECHNICAL CHARACTERISTICS (FLIS)
CONNECTION TYPETHREADED INTERNAL TUBE SECOND END
INSIDE DIAMETER0.188 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND FIRST END
NOMINAL THREAD SIZE0.438 INCHES SECOND END IN
CONNECTION STYLESWIVEL NUT FLARE FIRST END
END CONNECTION DESIGNSTRAIGHT FIRST END
OUTSIDE DIAMETER0.312 INCHES NOMINAL IN
LAYER COMPOSITION AND LOCATIONOUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
109037-23Interchangeable
interchangeable cross-reference
interchangeable
G630027-51Interchangeable
interchangeable cross-reference
interchangeable
G630027Interchangeable
interchangeable cross-reference
interchangeable
109037-9Interchangeable
interchangeable cross-reference
interchangeable
CV133048Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-25579Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS8000E552C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS8000E552C?
MS8000E552C is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace MS8000E552C?
There are 8 known substitutes for MS8000E552C: 109037-23, G630027-51, G630027 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS8000E552C?
MS8000E552C is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-796-7846. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS8000E552C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026