PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS8000E220A
MS8000E220A ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, exterior_color: NATURAL, vacuum_in_torr: 50.8, connection_type: THREADED INTERNAL TUBE FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-176-4482, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS8000E220A
NSN: 4720-00-176-4482
FSC: 4720
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
exterior_colorNATURAL
vacuum_in_torr50.8
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.188 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.312 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
features_providedELECTROSTATIC DISCHARGE CAPABILITY
operating_pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
NSN4720-00-176-4482
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MS8000E220A · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD SIZE: 0.438 INCHES FIRST END IN
•
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
•
BURST TEST PRESSURE: 12000.0 POUNDS PER SQUARE INCH LBS
•
TEMP RATING: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
INSIDE SURFACE CONDITION: SMOOTH
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
FEATURES PROVIDED: ELECTROSTATIC DISCHARGE CAPABILITY
•
MINIMUM INSIDE BENDING RADIUS: 2.000 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD SIZE0.438 INCHES FIRST END IN
LAYER COMPOSITION AND LOCATIONOUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
BURST TEST PRESSURE12000.0 POUNDS PER SQUARE INCH LBS
TEMP RATING-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF
INSIDE SURFACE CONDITIONSMOOTH
END CONNECTION DESIGNSTRAIGHT FIRST END
FEATURES PROVIDEDELECTROSTATIC DISCHARGE CAPABILITY
MINIMUM INSIDE BENDING RADIUS2.000 INCHES IN
EXTERIOR COLORNATURAL
OUTER COVERING ENVIRONMENTAL PROTECTIONCORROSION RESISTANT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
63000110-0276Interchangeable
interchangeable cross-reference
interchangeable
L666100K0276Interchangeable
interchangeable cross-reference
interchangeable
S79BR07-10C0276Interchangeable
interchangeable cross-reference
interchangeable
S80BR08-16C0114Interchangeable
interchangeable cross-reference
interchangeable
63000216Z0114Interchangeable
interchangeable cross-reference
interchangeable
R10106FN16Z0114Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS8000E220A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS8000E220A?
MS8000E220A is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace MS8000E220A?
There are 23 known substitutes for MS8000E220A: 63000110-0276, L666100K0276, S79BR07-10C0276 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS8000E220A?
MS8000E220A is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-176-4482. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS8000E220A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026