PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS527960-6
MS527960-6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include body_width: 1.000 INCHES NOMINAL IN, knuckle_type: FRICTION, performance_type: NOT RATED, pin_removability: NONREMOVABLE, style_designator: BUTT, material_thickness: 0.030 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-223-4179, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS527960-6
NSN: 5340-00-223-4179
FSC: 5340
CAGE: 80204 — AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED DBA AMERICAN NATIONAL STANDARDS INSTITUTE (USA)
SPECIFICATIONS
body_width1.000 INCHES NOMINAL IN
knuckle_typeFRICTION
knuckle_quantity5
performance_typeNOT RATED
pin_removabilityNONREMOVABLE
style_designatorBUTT
material_thickness0.030 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL SURFACE
mounting_hole_diameter0.104 INCHES NOMINAL IN
mounting_hole_quantity4
pin_center_to_body_edge_distance0.515 INCHES NOMINAL IN
NSN5340-00-223-4179
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS527960-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE DIAMETER: 0.104 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.030 INCHES NOMINAL IN
•
BODY WIDTH: 1.000 INCHES NOMINAL IN
•
PIN CENTER TO BODY EDGE DISTANCE: 0.515 INCHES NOMINAL IN
•
REVERSIBLE FEATURE: NOT INCLUDED
•
KNUCKLE QUANTITY: 5
•
HINGE MOUNTING TYPE: FULL SURFACE
•
PERFORMANCE TYPE: NOT RATED
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING HOLE DIAMETER0.104 INCHES NOMINAL IN
MATERIAL THICKNESS0.030 INCHES NOMINAL IN
BODY WIDTH1.000 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE0.515 INCHES NOMINAL IN
REVERSIBLE FEATURENOT INCLUDED
KNUCKLE QUANTITY5
HINGE MOUNTING TYPEFULL SURFACE
PERFORMANCE TYPENOT RATED
PIN REMOVABILITYNONREMOVABLE
KNUCKLE TYPEFRICTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
02162Interchangeable
interchangeable cross-reference
interchangeable
24363Interchangeable
interchangeable cross-reference
interchangeable
ANSI A156.1 A8333Interchangeable
interchangeable cross-reference
interchangeable
BHMA-A156.1 A8173 3INInterchangeable
interchangeable cross-reference
interchangeable
BHMA-A156.1Interchangeable
interchangeable cross-reference
interchangeable
FFH116BAMEND2TYPE2027Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS527960-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS527960-6?
MS527960-6 is a HINGE,BUTT.
What parts can replace MS527960-6?
There are 21 known substitutes for MS527960-6: 02162, 24363, ANSI A156.1 A8333 and 18 more. Substitute compatibility should be verified for your specific system.
Is MS527960-6 still available?
MS527960-6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS527960-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026