PartsTable
Technical Data Sheet
MS52150-7SA ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, style_designator: TWO PIECE, loop_inside_diameter: 1.875 INCHES NOMINAL IN, fastening_device_type: SELF-LOCKING HEXAGON NUT, integral_nut_type_and_quantity: 2 SELF-LOCKING U BOLT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-213-4399, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS52150-7SA
NSN: 5340-01-213-4399
FSC: 5340
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL BAND
style_designatorTWO PIECE
loop_inside_diameter1.875 INCHES NOMINAL IN
fastening_device_typeSELF-LOCKING HEXAGON NUT
integral_nut_type_and_quantity2 SELF-LOCKING U BOLT
NSN5340-01-213-4399
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS52150-7SA MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
INTEGRAL NUT TYPE AND QUANTITY: 2 SELF-LOCKING U BOLT
STYLE DESIGNATOR: TWO PIECE
LOOP INSIDE DIAMETER: 1.875 INCHES NOMINAL IN
MATERIAL: STEEL BAND
FASTENING DEVICE TYPE: SELF-LOCKING HEXAGON NUT
TECHNICAL CHARACTERISTICS (FLIS)
INTEGRAL NUT TYPE AND QUANTITY2 SELF-LOCKING U BOLT
STYLE DESIGNATORTWO PIECE
LOOP INSIDE DIAMETER1.875 INCHES NOMINAL IN
MATERIALSTEEL BAND
FASTENING DEVICE TYPESELF-LOCKING HEXAGON NUT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
A-A-52406Upgraded Successor
successor cross-reference
successor
AA52406-35Upgraded Successor
successor cross-reference
successor
A-A-52406-35HEUpgraded Successor
successor cross-reference
successor
AA52406-33Upgraded Successor
successor cross-reference
successor
A-A-52406-33HEUpgraded Successor
successor cross-reference
successor
AA52406-20Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS52150-7SA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS52150-7SA?
MS52150-7SA is a CLAMP,LOOP.
What parts can replace MS52150-7SA?
There are 9 known substitutes for MS52150-7SA: A-A-52406, AA52406-35, A-A-52406-35HE and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS52150-7SA?
MS52150-7SA is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-213-4399. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS52150-7SA