PartsTable / COMPONENT / MS5200-4
MS5200-4
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.188 INCHES MINIMUM AND 1.204 INCHES MAXIMUM IN, overall_length: 1.188 INCHES MINIMUM AND 1.204 INCHES MAXIMUM IN, hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL, style_designator: NON-CIRCULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-079-7839, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS5200-4
NSN: 5330-00-079-7839 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER CHLOROPRENE CLASS CR OVERALL hole_diameter 0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN overall_width 1.188 INCHES MINIMUM AND 1.204 INCHES MAXIMUM IN overall_length 1.188 INCHES MINIMUM AND 1.204 INCHES MAXIMUM IN hardness_rating 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL style_designator NON-CIRCULAR aperture_diameter 0.875 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN bolt_hole_quantity 4 outside_corner_radius 0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN cross-sectional_thickness 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION material_document_and_classification ASTM D2000 2BC515ABC1F2Z1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL NSN 5330-00-079-7839
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: MS5200-4
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
• STYLE DESIGNATOR: NON-CIRCULAR
• APERTURE DIAMETER: 0.875 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN
• CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.896 INCHES MINIMUM AND 0.916 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
• HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH 0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN STYLE DESIGNATOR NON-CIRCULAR APERTURE DIAMETER 0.875 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN OVERALL LENGTH 1.188 INCHES MINIMUM AND 1.204 INCHES MAXIMUM IN CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH 0.896 INCHES MINIMUM AND 0.916 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN HARDNESS RATING 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL OVERALL WIDTH 1.188 INCHES MINIMUM AND 1.204 INCHES MAXIMUM IN MATERIAL RUBBER CHLOROPRENE CLASS CR OVERALL BOLT HOLE QUANTITY 4
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
102669 Interchangeable interchangeable cross-reference
interchangeable
5766 Interchangeable interchangeable cross-reference
interchangeable
BC1443 Interchangeable interchangeable cross-reference
interchangeable
MS51007-4 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy MS5200-4?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS5200-4?
MS5200-4 is a GASKET.
What parts can replace MS5200-4?
There are 11 known substitutes for MS5200-4: 102669, 5766, BC1443 and 8 more. Substitute compatibility should be verified for your specific system.
Is MS5200-4 still available?
MS5200-4 is currently cancelled.
Request a Quote — MS5200-4