MS51990-110P — RING,LOCK,SERRATED

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

MS51990-110P: RING,LOCK,SERRATED.

The RING,LOCK,SERRATED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1117, overall_height: 0.176 INCHES NOMINAL IN, pilot_diameter: 0.837 INCHES NOMINAL IN, inside_diameter: 0.692 INCHES MINIMUM AND 0.699 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE, end_item_identification: ARMORED MULTI-PURPOSE VEHICLE (AMPV). This part is cataloged in the U.S.

Government catalog under NSN 5365-00-218-4927, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS51990-110P

NSN: 5365-00-218-4927
FSC: 5365 — Bushings, Rings, Shims, and Spacers
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	STEEL COMP 1117
overall_height	0.176 INCHES NOMINAL IN
pilot_diameter	0.837 INCHES NOMINAL IN
inside_diameter	0.692 INCHES MINIMUM AND 0.699 INCHES MAXIMUM IN
surface_treatment	CADMIUM AND CHROMATE
end_item_identification	ARMORED MULTI-PURPOSE VEHICLE (AMPV)
inner_serration_quantity	30
overall_outside_diameter	0.906 INCHES MINIMUM AND 0.915 INCHES MAXIMUM IN
side_outer_serrations_omitted_for_close_edge_installation	TWO SIDES
NSN	5365-00-218-4927

COMPONENT DIAGRAM

KEY FEATURES

•

OVERALL OUTSIDE DIAMETER: 0.906 INCHES MINIMUM AND 0.915 INCHES MAXIMUM IN

•

INNER SERRATION QUANTITY: 30

•

PILOT DIAMETER: 0.837 INCHES NOMINAL IN

•

INSIDE DIAMETER: 0.692 INCHES MINIMUM AND 0.699 INCHES MAXIMUM IN

•

SIDE OUTER SERRATIONS OMITTED FOR CLOSE EDGE INSTALLATION: TWO SIDES

•

SURFACE TREATMENT: CADMIUM AND CHROMATE

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	0.176 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER	0.906 INCHES MINIMUM AND 0.915 INCHES MAXIMUM IN
INNER SERRATION QUANTITY	30
PILOT DIAMETER	0.837 INCHES NOMINAL IN
INSIDE DIAMETER	0.692 INCHES MINIMUM AND 0.699 INCHES MAXIMUM IN
SIDE OUTER SERRATIONS OMITTED FOR CLOSE EDGE INSTALLATION	TWO SIDES
SURFACE TREATMENT	CADMIUM AND CHROMATE
END ITEM IDENTIFICATION	ARMORED MULTI-PURPOSE VEHICLE (AMPV)
MATERIAL	STEEL COMP 1117

SUBSTITUTES & CROSS-REFERENCES 6

AA59558-109Reference document

Same NSN cross-reference

Reference document — Secondary reference

52511-230ADLSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MS51990Reference document

Same NSN cross-reference

Reference document — Secondary reference

AS51990Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

A-A-59558Reference document

Same NSN cross-reference

Reference document — Secondary reference

RLRR56SB11Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS51990-110P?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS51990-110P?

MS51990-110P is a RING,LOCK,SERRATED.

What parts can replace MS51990-110P?

There are 6 known substitutes for MS51990-110P: AA59558-109, 52511-230ADL, MS51990 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS51990-110P?

MS51990-110P is cataloged in the U.S. Government catalog under NSN 5365-00-218-4927. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS51990-110P — RING,LOCK,SERRATED

Request a Quote — MS51990-110P