Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.635 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN, overall_length: 1.688 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN, special_features: SIZE 1/2 IN. THIN WALL EMT CONDUIT IN.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-924-1683, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS51956-1
NSN:5340-00-924-1683 FSC:5340 CAGE:96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
cushion
NOT INCLUDED
material
STEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_pad
NOT INCLUDED
overall_width
0.635 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
overall_length
1.688 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN
special_features
SIZE 1/2 IN. THIN WALL EMT CONDUIT IN
style_designator
CURVED ARCH
surface_treatment
ZINC
material_thickness
0.078 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
mounting_hole_size
0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
inside_diameter/arch_length
0.706 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch
0.625 INCHES NOMINAL IN
NSN
5340-00-924-1683
COMPONENT DIAGRAM
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: CURVED ARCH
•
SURFACE TREATMENT: ZINC
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.625 INCHES NOMINAL IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS51956-1?
MS51956-1 is a STRAP,RETAINING.
What parts can replace MS51956-1?
There are 21 known substitutes for MS51956-1: FF-S-760, 167A33, NASM760-TYP1, STYB, 5/16 and 18 more. Substitute compatibility should be verified for your specific system.
Is MS51956-1 still available?
MS51956-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.