PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS51943-50
MS51943-50 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL NUT, nut_style: HEXAGON, nut_height: 1.124 INCHES MAXIMUM IN, temp_rating: 250.0 FAHRENHEIT NOMINAL DEGF, thread_class: 3B, thread_series: UNF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-340-4953, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS51943-50
NSN: 5310-00-340-4953
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL NUT
nut_styleHEXAGON
nut_height1.124 INCHES MAXIMUM IN
temp_rating250.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNF
hardness_rating26.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL EXCEPT INSERT
width_across_flats1.450 INCHES MINIMUM AND 1.502 INCHES MAXIMUM IN
nominal_thread_size1.000 INCHES IN
NSN5310-00-340-4953
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS51943-50 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.450 INCHES MINIMUM AND 1.502 INCHES MAXIMUM IN
•
NUT HEIGHT: 1.124 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL EXCEPT INSERT
•
TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF
•
MATERIAL: PLASTIC POLYAMIDE NYLON LOCKING INSERT
•
THREAD SERIES: UNF
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH ACROSS FLATS1.450 INCHES MINIMUM AND 1.502 INCHES MAXIMUM IN
NUT HEIGHT1.124 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL EXCEPT INSERT
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
MATERIALPLASTIC POLYAMIDE NYLON LOCKING INSERT
THREAD SERIESUNF
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
MATERIALSTEEL NUT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
TIP00017Interchangeable
interchangeable cross-reference
interchangeable
L31163Interchangeable
interchangeable cross-reference
interchangeable
456720131110Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-45913/3Interchangeable
interchangeable cross-reference
interchangeable
MS51943-12Interchangeable
interchangeable cross-reference
interchangeable
M45913/3-9FG8PInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS51943-50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS51943-50?
MS51943-50 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace MS51943-50?
There are 16 known substitutes for MS51943-50: TIP00017, L31163, 456720131110 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS51943-50?
MS51943-50 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-340-4953. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS51943-50

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026