PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS51096-359
MS51096-359 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_type: DRILLED, head_style: HEXAGON, head_height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN, thread_class: 2A A, hole_diameter: 0.062 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-912-5113, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS51096-359
NSN: 5305-00-912-5113
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
hole_typeDRILLED
head_styleHEXAGON
head_height0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
thread_class2A A
hole_diameter0.062 INCHES NOMINAL IN
hole_quantity1
thread_length0.719 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
fastener_length0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
hardness_rating23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5305-00-912-5113
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS51096-359 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2A A
•
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH LBS
•
HOLE TYPE: DRILLED
•
HOLE QUANTITY: 1
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
THREAD LENGTH: 0.719 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.062 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNF
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2A A
MINIMUM YIELD STRENGTH85000 POUNDS PER SQUARE INCH LBS
HOLE TYPEDRILLED
HOLE QUANTITY1
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
THREAD LENGTH0.719 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
HOLE DIAMETER0.062 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNF
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
251574Interchangeable
interchangeable cross-reference
interchangeable
5305PL0544326Interchangeable
interchangeable cross-reference
interchangeable
MS90726-59Interchangeable
interchangeable cross-reference
interchangeable
MS51096-59Interchangeable
Same NIIN cross-reference
interchangeable
1C614Interchangeable
Same NIIN cross-reference
interchangeable
XX003-0684Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS51096-359?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS51096-359?
MS51096-359 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS51096-359?
There are 8 known substitutes for MS51096-359: 251574, 5305PL0544326, MS90726-59 and 5 more. Substitute compatibility should be verified for your specific system.
Is MS51096-359 still available?
MS51096-359 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS51096-359

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026