PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS51095-384
MS51095-384 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_type: DRILLED, head_style: HEXAGON, head_height: 0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN, thread_class: 2A A, hole_diameter: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-941-9459, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS51095-384
NSN: 5305-00-941-9459
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
hole_typeDRILLED
head_styleHEXAGON
head_height0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
thread_class2A A
hole_diameter0.062 INCHES NOMINAL IN
hole_quantity1
thread_length0.750 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES THREADS
fastener_length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
hardness_rating25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
NSN5305-00-941-9459
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS51095-384 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
HOLE DIAMETER: 0.062 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
HOLE CONFIGURATION STYLE: HEXAGON FLATS
•
MATERIAL: STEEL OVERALL
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
•
THREAD LENGTH: 0.750 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
HOLE DIAMETER0.062 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HOLE CONFIGURATION STYLEHEXAGON FLATS
MATERIALSTEEL OVERALL
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
THREAD LENGTH0.750 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
HOLE QUANTITY1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
MS51095-420Interchangeable
interchangeable cross-reference
interchangeable
6051908Interchangeable
interchangeable cross-reference
interchangeable
70009-119Interchangeable
interchangeable cross-reference
interchangeable
MS51095-444Interchangeable
interchangeable cross-reference
interchangeable
FF-S-85Interchangeable
interchangeable cross-reference
interchangeable
7-115-140450Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS51095-384?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS51095-384?
MS51095-384 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS51095-384?
There are 19 known substitutes for MS51095-384: MS51095-420, 6051908, 70009-119 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS51095-384?
MS51095-384 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-941-9459. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS51095-384

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026