PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS51095-360
MS51095-360 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_type: DRILLED, head_style: HEXAGON, head_height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN, thread_class: 2A A, hole_diameter: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-914-6128, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS51095-360
NSN: 5305-00-914-6128
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
hole_typeDRILLED
head_styleHEXAGON
head_height0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
thread_class2A A
hole_diameter0.062 INCHES NOMINAL IN
hole_quantity1
thread_length0.844 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
fastener_length0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
hardness_rating23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5305-00-914-6128
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS51095-360 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.844 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
HOLE QUANTITY: 1
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL: STEEL OVERALL
•
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH LBS
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.844 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
FASTENER LENGTH0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
HOLE QUANTITY1
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
MATERIALSTEEL OVERALL
MINIMUM YIELD STRENGTH85000 POUNDS PER SQUARE INCH LBS
THREAD CLASS2A A
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
HOLE CONFIGURATION STYLEHEXAGON FLATS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
MS90725-60Interchangeable
interchangeable cross-reference
interchangeable
MS51095-360Interchangeable
interchangeable cross-reference
interchangeable
9428M65P20Interchangeable
interchangeable cross-reference
interchangeable
5305009146128Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS51095-360?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS51095-360?
MS51095-360 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS51095-360?
There are 4 known substitutes for MS51095-360: MS90725-60, MS51095-360, 9428M65P20 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS51095-360?
MS51095-360 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-914-6128. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS51095-360

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026