PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS51095-338
MS51095-338 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include hole_type: DRILLED, head_style: HEXAGON, head_height: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN, thread_class: 2A A, hole_diameter: 0.060 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN, thread_length: 1.062 INCHES MINIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-111-0622, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS51095-338
NSN: 5305-01-111-0622
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
hole_typeDRILLED
head_styleHEXAGON
head_height0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
thread_class2A A
hole_diameter0.060 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
hole_quantity1
thread_length1.062 INCHES MINIMUM IN
fastener_length1.938 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
hardness_rating25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_between_flats0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
NSN5305-01-111-0622
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS51095-338 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH LBS
•
HOLE QUANTITY: 1
•
THREAD QUANTITY PER INCH: 18
•
HOLE TYPE: DRILLED
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 5 GRADE
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD HEIGHT0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH120000 POUNDS PER SQUARE INCH LBS
HOLE QUANTITY1
THREAD QUANTITY PER INCH18
HOLE TYPEDRILLED
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE AND 5 GRADE
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
MS51095-420Interchangeable
interchangeable cross-reference
interchangeable
6051908Interchangeable
interchangeable cross-reference
interchangeable
70009-119Interchangeable
interchangeable cross-reference
interchangeable
MS51095-444Interchangeable
interchangeable cross-reference
interchangeable
FF-S-85Interchangeable
interchangeable cross-reference
interchangeable
7-115-140450Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS51095-338?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS51095-338?
MS51095-338 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS51095-338?
There are 19 known substitutes for MS51095-338: MS51095-420, 6051908, 70009-119 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS51095-338?
MS51095-338 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-111-0622. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS51095-338

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026