PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS51025-54
MS51025-54 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SETSCREW is a the manufacturer industrial component. Key specifications include head_style: HEADLESS (SETSCREW), point_style: FLAT, thread_class: 3A A, thread_length: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, fastener_length: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, hardness_rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-724-6738, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS51025-54
NSN: 5305-00-724-6738
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 4032 OR STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
head_styleHEADLESS (SETSCREW)
point_styleFLAT
thread_class3A A
thread_length0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
fastener_length0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_across_flats0.125 INCHES NOMINAL IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.250 INCHES IN
NSN5305-00-724-6738
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS51025-54 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
THREAD QUANTITY PER INCH: 20
•
FASTENER LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD ALL MATERIAL RESPONSES OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL: STEEL COMP 4032 OR STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD DIAMETER0.250 INCHES IN
THREAD QUANTITY PER INCH20
FASTENER LENGTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD ALL MATERIAL RESPONSES OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
MATERIALSTEEL COMP 4032 OR STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
THREAD LENGTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
ASME B94.19Interchangeable
interchangeable cross-reference
interchangeable
1561-0625Interchangeable
interchangeable cross-reference
interchangeable
53410Interchangeable
interchangeable cross-reference
interchangeable
645-4129-1Interchangeable
interchangeable cross-reference
interchangeable
360305Interchangeable
interchangeable cross-reference
interchangeable
263319Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS51025-54?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS51025-54?
MS51025-54 is a SETSCREW.
What parts can replace MS51025-54?
There are 8 known substitutes for MS51025-54: ASME B94.19, 1561-0625, 53410 and 5 more. Substitute compatibility should be verified for your specific system.
Is MS51025-54 still available?
MS51025-54 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS51025-54

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026