PartsTable
Technical Data Sheet
Download PDF

MS51007-14 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS51007-14: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.750 INCHES MINIMUM AND 2.766 INCHES MAXIMUM IN, overall_length: 2.750 INCHES MINIMUM AND 2.766 INCHES MAXIMUM IN, hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL, style_designator: NON-CIRCULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-274-7263, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS51007-14
NSN: 5330-00-274-7263
FSC: 5330 — Packing and Gasket Materials
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.750 INCHES MINIMUM AND 2.766 INCHES MAXIMUM IN
overall_length2.750 INCHES MINIMUM AND 2.766 INCHES MAXIMUM IN
hardness_rating45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designatorNON-CIRCULAR
aperture_diameter2.438 INCHES MINIMUM AND 2.454 INCHES MAXIMUM IN
bolt_hole_quantity4
outside_corner_radius0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
cross-sectional_thickness0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationASTM D2000 2BC515A1B1C1F2Z1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-274-7263
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS51007-14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BC515A1B1C1F2Z1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 2.438 INCHES MINIMUM AND 2.454 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
HARDNESS RATING45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 2BC515A1B1C1F2Z1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH2.750 INCHES MINIMUM AND 2.766 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.750 INCHES MINIMUM AND 2.766 INCHES MAXIMUM IN
APERTURE DIAMETER2.438 INCHES MINIMUM AND 2.454 INCHES MAXIMUM IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 2
SAE-AS51007Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
5330PL0972519Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS51007-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS51007-14?
MS51007-14 is a GASKET.
What parts can replace MS51007-14?
There are 2 known substitutes for MS51007-14: SAE-AS51007, 5330PL0972519. Substitute compatibility should be verified for your specific system.
What is the NSN for MS51007-14?
MS51007-14 is cataloged in the U.S. Government catalog under NSN 5330-00-274-7263. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS51007-14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.