PartsTable
Technical Data Sheet
Download PDF

MS39176-7 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

MS39176-7: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: STEEL OVERALL, body_style: CYLINDRICAL BUSHING MOUNTED, valve_size: 5.000 INCHES IN, body_length: 0.468 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-240-1741, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS39176-7
NSN: 4730-00-240-1741
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
body_styleCYLINDRICAL BUSHING MOUNTED
valve_size5.000 INCHES IN
body_length0.468 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
shaft_length0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
shank_length3.560 INCHES NOMINAL IN
thread_class2A A
actuator_typeSINGLE SHAFT
body_diameter1.032 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
thread_length3.250 INCHES MINIMUM IN
overall_length0.937 INCHES MINIMUM AND 1.187 INCHES MAXIMUM IN
NSN4730-00-240-1741
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: MS39176-7 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 6
8-060110BReference document
Same NSN cross-reference
Reference document — Secondary reference
120131Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
J512Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-J512Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
2102X8Reference document
Same NSN cross-reference
Reference document — Secondary reference
W61X8Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS39176-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS39176-7?
MS39176-7 is a RESISTOR,VARIABLE,NONWIRE WOUND,.
What parts can replace MS39176-7?
There are 6 known substitutes for MS39176-7: 8-060110B, 120131, J512 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS39176-7?
MS39176-7 is cataloged in the U.S. Government catalog under NSN 4730-00-240-1741. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS39176-7