PartsTable
Technical Data Sheet
Download PDF

MS39087 — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS39087: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, thread_class: 2B, thread_length: 0.614 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN, overall_length: 4.870 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S), handle_clearance: 1.188 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-518-5185, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS39087
NSN: 5340-01-518-5185
FSC: 5340 — Hardware, Commercial
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OVERALL
thread_class2B
thread_length0.614 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN
overall_length4.870 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S)
handle_clearance1.188 INCHES NOMINAL IN
special_featuresHANDLE FINISHED BLACK OXIDE
style_designatorROUND
thread_directionRIGHT-HAND
surface_treatmentOXIDE OVERALL
nominal_thread_size0.190 INCHES IN
end_item_identificationTC JUNCTION
NSN5340-01-518-5185
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS39087 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924, CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.560 INCHES NOMINAL IN
•
MOUNTING METHOD: THREADED HOLE(S)
•
THREAD LENGTH: 0.614 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ROUND
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8, TYPE 6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924, CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.560 INCHES NOMINAL IN
MOUNTING METHODTHREADED HOLE(S)
THREAD LENGTH0.614 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN
STYLE DESIGNATORROUND
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8, TYPE 6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH4.870 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 2
12742-A-1032-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
NASM39087Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS39087?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS39087?
MS39087 is a HANDLE,BOW.
What parts can replace MS39087?
There are 2 known substitutes for MS39087: 12742-A-1032-2, NASM39087. Substitute compatibility should be verified for your specific system.
What is the NSN for MS39087?
MS39087 is cataloged in the U.S. Government catalog under NSN 5340-01-518-5185. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS39087